To change the Wi-Fi network that your security light is connected to, simply take it back through the set-up process – and choose your new wireless network. You will need to do this if you change your Wi-Fi credentials (network name or password), or you want to connect your security light to a new wireless access point (including a new router or Wi-Fi extender)
Read below for a step-by-step guide for changing your wireless network.
Step 1 - Sign In to the Kuna Mobile App
Log in to the Kuna app using your email and password. If you don't remember your password, click the "Forgot your password?" link to reset it.
Step 2 - Pair Your Smart Security Light to Your Account
Once you log in to your Kuna account, you will see the Devices tab. To pair a device from the Welcome screen, click the Add Device button.
Once you have clicked either the Device Plus button or the Add Device button, you will be prompted to choose the type of device you would like to pair with your account. In this walkthrough, we'll be setting up a Smart Security Light, so choose that option by tapping on the picture of the Smart Security Light.
To find out more about pairing a Kuna Companion, click here. If you are trying to change the Wi-Fi information for your Toucan camera, you'll need to run through the Toucan Setup Process after tapping the Add Device button.
Because this process uses the Bluetooth on your mobile device, you will need to be close to your Smart Security Light. We recommend holding your mobile device no more than 5 feet away from your light during this initial pairing process.
If there are multiple Smart Security Lights in the area, like in the screen shot below, the mobile app will tell you which one is the closest. The one that you are pairing should have the strongest Bluetooth signal, so make sure that you're standing close to it. If the app displays multiple Kunas, the one you're setting up should have the strongest Bluetooth signal. Make sure you're standing close to it.
Once you have identified the closest Smart Security Light, tap that device's name to continue the setup process. If there is only one device in the area, then you can choose that one. In the screen shot below, we will choose New Device 1.
Please Note: If you are setting up multiple Smart Security Lights, you will need to go through this set-up process for each new Smart Security Light, starting at Step 4. This allows you to set different locations and Wi-Fi networks for each Smart Security Light, if you wish.
Step 3 - Choose a Name for Your Device
After selecting the Smart Security Light that you would like to pair, the mobile app will prompt you to choose a name for this new light. The mobile app automatically suggests a few of the most popular names, but you can also choose a custom name.
In the screen shot below, we will choose the name "Front Door" for our device.
Step 4 - Connect Your Smart Security Light to WiFi
Now that you have chosen a name for your Smart Security Light, it's time to connect it to your home's Wi-Fi network. The mobile app displays all of the Wi-Fi networks that it is able to find in the area. Make sure that your home's Wi-Fi network displays at least two bars in the mobile app. If your Wi-Fi network shows less than two bars, or is not displayed in this section, move your wireless router closer to your Smart Security Light.
Once you have located your home's Wi-Fi network, tap on the network name to select it and move to the next section. In the screen shot below, we will select the Wi-Fi network "kuna".
Once you have selected the network for your Smart Security Light, click into the Wi-Fi password section and enter your home network's Wi-Fi password. We suggest using the Show Password function, to ensure that your password is entered correctly.
Once your Wi-Fi password is entered correctly, click the Connect button in the top right-hand corner.
Your Smart Security Light will now connect to your home's Wi-Fi network!
Step 5 - Select Your Timezone and Location
Your Smart Security Light will use the timezone to determine sunrise and sunset times for your location. The mobile app will automatically suggest the timezone your mobile device is set to, but you can also select a different timezone. In the screen shot below, we'll choose the timezone "America/Los Angeles".
After you set your timezone, we'll choose the city that your Smart Security Light is setup in. The city information is used for the sunrise and sunset times for your light schedule. The Kuna app uses your approximate location to make your light schedule more accurate. You DO NOT need to provide your full address.
If you have set up any previous devices, the mobile app will suggest a city for you. Otherwise, you can click "Enter new location" to choose a new or different city for your device.
Once you choose your location, we'll move onto the light schedule section. The mobile app will suggest using the default settings – turning the light on at dusk and off at dawn. If you would like to keep the default settings, click "Yes – Finish Setup". If you would like to change the default settings, click "No – Change light schedule".
To learn more about the light schedule options, click here. You can also change your light schedule at any time after you finish setting up your device.
Once you click "Yes – Finish setup", you're done!
If you have an older version of the mobile app, click here to view the appropriate article.