Kuna AI Detection is available for all Premium Plan members (including trial users). To learn more about standard detection, check out this article.
Kuna AI is the home security AI platform for Camera Porch Lights and Camera Porch Lights. It allows Kuna to report if it is seeing people or vehicles, and also count how many of each it sees.
If you're on a Kuna Premium Plan or a free trial of Kuna Premium, you can activate Kuna's AI features by going to your individual camera settings and turning on “Kuna AI Detection”.
Adjusting Your Detection Sensitivity
You can customize your alerts to be more or less sensitive by going into Events Preferences. By default, people and vehicle detection will be turned on, but you can toggle either of these options off if you wish.
Your Events Preferences slider will control both Kuna AI People (person detection) and Kuna AI Cars (vehicle detection) - if you have either or both of these features turned on. The Default setting for Kuna AI Smart Detection's sensitivity level is 0, which is designed to work for most environments.
If you find that you're getting too many false detections, or you're missing detections, you can offset the sensitivity by 25 steps in either direction (+25 for more events and -25 for fewer events). Tap Save in upper righthand corner for your changes to take effect!
Adjusting Your Area of Interest
The Area of Interest sets the region where the AI will send alerts if an object is detected there. Sections of "interest" are denoted by blue rectangles. You can set specific areas of interest for Kuna AI People and Kuna AI Cars - to further customize your detection settings.
Tap and drag rectangles to add or remove them. Tap Save when you're finished making your selection.
Note: If any part of the object (person or vehicle) overlaps with the blue region of the area of interest an alert will be sent and recording started.
Viewing a Recording Reason
Kuna AI Detection will now show you the object that triggered a motion event! You can use this information to make your Advanced Motion Sensitivity Settings even more accurate. Simply open a recording and select the AI Event button in the lower right-hand corner:
The person, vehicle or object in the blue rectangle is what triggered the motion event:
For example, in this recording, Kuna AI was 85% confident that it detected a person. Tap the arrow on the right to see additional information or change your settings.